facebook

Optimizing Self-Consumption with BESS: Reducing Costs in BTM Operations

Self-consumption optimization with battery storage increases the utilization of self-generated energy, thus lowering electricity costs in Behind-the-Meter (BTM) operations. Companies reduce their grid consumption while simultaneously increasing their energy independence. This contribution shows how this potential can be economically exploited.

The Self-consumption optimization is one of the most effective levers for sustainably reducing energy costs in a company. Especially in Behind-the-Meter (BTM) Operation enables the use of Battery Energy Storage System (BESS) significantly more efficient use of self-generated energy - for example from photovoltaic or CHP systems.

Companies can thus reduce their grid electricity consumption, lower electricity costs, and make their energy supply more independent.

Self-consumption optimization

Self-consumption optimization describes the targeted use of self-generated electricity within one's own company, instead of feeding it into the public grid. The goal is clear: Consume as much of your own electricity as possible instead of selling it cheaply and buying it back expensively.

Without Large-scale battery storage is the self-consumption rate in many cases only at 30–40 %. With a BESS, on the other hand ≥ 70 % realistic.

How does self-consumption optimization with BESS work?

The principle is simple, but extremely effective economically:

  • Solar power systems generate electricity primarily Afternoon
  • However, the company's electricity demand often arises time-delayed (e.g., in the morning, in the evening, or at night)

Without memory, that means:

  • Surpluses are fed in (low remuneration)
  • At the same time, electricity will be purchased expensively from the grid later on.

A BESS solves exactly this problem:

  • Storage of PV surpluses
  • Delayed use in your own operation
  • Automated control via an energy management system (EMS)
blank

The energy management systemEMStakes into account:

  • Lastprofile
  • Electricity prices and tariffs
  • Weather forecasts
  • PV generation

Economic benefits of self-consumption optimization

The effects are immediately measurable and have a direct impact on operating costs:

  • Replacement of mains power:
    Self-generated electricity replaces expensive electricity procurement (typical 15–20 ct/kWh or more)
  • Higher self-consumption rate:
    Increase of approximately 30–40 % to ≥ 70 %
  • Reduction of grid fees and levies
  • Faster payback of the PV or BESS investment

Every additional kilowatt-hour used by yourself improves the cost-effectiveness.

Regulatory Frameworks as an Additional Driver

The importance of self-consumption optimization is also increasing due to new regulatory requirements:

  • For new solar PV systems, there is an increasing trend towards Limiting the feed-in power (e.g., 60 %) without a controller
  • Excess electricity often has to be to be regulated

That means: Valuable energy is lost.

A BESS, on the other hand, allows:

  • Storage instead of shutdown
  • Later use in operation
  • Optional grid-friendly use (e.g., during negative electricity prices)

Additional benefits for businesses

In addition to the direct cost effects, there are additional strategic advantages:

  • Greater energy independence
  • Stabilization of the power supply during operation
  • Reduction of CO₂ emissions and certificate costs
  • Grid relief

Especially in an industrial setting, self-consumption is thus becoming a central component of modern energy strategies.

Who benefits most from self-consumption optimization?

The use of BESS for self-consumption optimization is particularly sensible for companies with:

  • high power consumption
  • Own PV, CHP, or wind power plant
  • Peak loads or fluctuating consumption
  • rising energy and network costs

The higher the difference between the feed-in tariff and the electricity price, the greater the economic advantage.

Conclusion: Self-consumption optimization is the key to profitability

Self-consumption optimization using BESS is one of the most efficient measures to sustainably reduce energy costs in a company.

By intelligently storing and using self-generated electricity, you can:

  • Significantly reduce electricity costs
  • Massively increase self-consumption rates
  • avoid regulatory disadvantages
  • Amortize investments faster

This makes it clear: A BESS (Battery Energy Storage System) in a grid-connected operation is not just a technical add-on, but a central economic cornerstone of modern energy supply.

Frequently Asked Questions

What is self-consumption optimization?

Self-consumption optimization means using as much self-generated electricity as possible within your own company instead of feeding it into the grid.

How does a BESS help?

A battery storage system stores excess electricity and makes it available with a time delay – precisely when it is needed.

What is the self-consumption rate with storage?

With BESS, self-consumption rates of well over 90% are possible.

Why does that make economic sense?

Because self-consumed electricity replaces expensive grid electricity (approx. 15–20 cents/kWh), while fed-in electricity is poorly compensated.

Is self-consumption optimization worthwhile for every company?

It is particularly attractive economically for companies with their own power generation and high energy demand.

Kostenloses Erstgespräch

Lastgang & Standort analysieren — in 30 Minuten zur wirtschaftlichsten Energielösung.

Wir analysieren Ihren Standort, Ihr Lastprofil und Ihre Bezugskosten herstellerunabhängig. Sie erfahren sofort, wie PV und Batteriespeicher Ihre Netzkosten senken und regulatorische Fristen (EnWG, EPBD) optimal nutzen – ohne technisches Risiko oder Eigeninvestition.

Regulatorik und Deadlines im Blick · Inkl. 250+ Simulationsvarianten · Kostenlos & ohne Commitment

More interesting articles

Reactive current for PV systems Header

Reactive current for PV systems

Reactive power does not perform useful work, but it is essential for field construction in the AC grid and for static voltage control. According to VDE-AR-N 4105, PV systems with a capacity of 135 kW or more are required to provide reactive power via inverters to support grid stability decentrally and to compensate for voltage fluctuations.

Read more "
10 prejudices against commercial PV systems - installers at work

10 prejudices against commercial PV systems

Is PV only worthwhile with south-facing orientation, and what about the fire hazard? We fact-check the most common rumors and show that modern large-scale systems are a central component for any future-oriented company, thanks to double-digit returns and minimal maintenance.

Read more "
Solar carports - aerial view

Newsletter registration